|
Please Select Your Part...
|   | | |
| Chevrolet P10 - Engine & Drivetrain | Clutch Kit
Fit Years: 1980; SACHS CLUTCH KIT
12 in. OD x 1-1/8 in. ID disc diameter, 10 teeth; Does not include flywheel, clutch alignment tool and pilot bushing; Offers increased torque capacity, endurance and high performance stability; Guarantees increased clamp load; 100 percent new production parts built to perform. | $107.19 | | Battery Relocation Kit
Fit Years: All; TAYLOR CABLE RELOCATOR KIT, SINGLE TRUNK MOUNT
Reduces Engine Compartment Clutter, Provides Better Weight Distribution For Improved Traction Stability, Factory Crimped Terminals On 100% Copper Cables, 16' Red 2 Ga. Cable, Battery To Starter, 20 Black 2 Gauge Cable, Battery To Ground, 13" X 7.25" Heavy Gauge Coated Steel Tray, 3/8" J Bolts And Hold Down With Installation Hardware, Contains 1 Gauge Welding Cable, With Taylor Cable's Limited 90-Day Warranty | $114.58 | | Oil Pan
Fit Years: 1979; TRUCKEFX OIL PAN, STEEL, BLACK
A high quality, direct fit OE replacement oil pan; With 1-year limited TruckEFX warranty. | $91.81 | | Cap and Rotor
Fit Years: 1979; MSD CAP-A-DAPT CAP AND ROTOR KIT
Comes complete with an OE internal coil, brass terminals and a cap spacer; Molded from DuPont Rynite for strength and high dielectric properties; With 1-year MSD limited warranty. | $28.60 | | Distributor Cap
Fit Years: 1979; PROZONE DISTRIBUTOR CAP, PLASTIC, BLACK, NEW
Includes 4 mounting screws; With 8 vertical wire towers and brass contacts material; Without distributor vent; A high quality, OE replacement distributor cap; Clip-on cap attachment; With 18 months limited Prozone warranty. | $26.98 | | | more products.. | | | Chevrolet P10 - Exterior Accessories | Door Lock Actuator
Fit Years: All; AUTOTRUST GOLD UNIVERSAL POWERED DOOR LOCK ACTUATOR, SOLD INDIVIDUALLY
12 volts; 5 wires; Gun style; Central lock; AutoTrust Gold products are guaranteed to meet or exceed the original manufacturer's standards and quality; Backed by a 5-year limited warranty; If the part breaks or is damaged - even if you are involved in a wreck or accident - anytime within 5 years from purchase, simply cover shipping and handling and we will send you a new part. | $8.15 | | Antenna
Fit Years: 1975-1980; TRUCKEFX UNIVERSAL FENDER MOUNT ANTENNA, MANUAL, BLACK
4-section mast; 1200 mm cable; With top and side key; A high quality universal fender mount antenna; May require modification or other adjustment to your vehicle upon installation; With 1-year limited TruckEFX warranty. | $7.18 | | Antenna
Fit Years: 1975-1980; UNIVERSAL PILLAR SIDE MOUNT ANTENNA, MANUAL, STAINLESS STEEL, POLISHED
4-section mast; 2600 mm cable; A high quality pillar side mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty. | $12.92 | | Door Lock Actuator
Fit Years: All; PROZONE UNIVERSAL POWER DOOR LOCK ACTUATOR
12 volts; 5 wires; Gun style; Central lock; A high quality door lock actuator; With 18 months limited Prozone warranty. | $8.15 | | Door Lock Actuator
Fit Years: All; CERTIFIEDXL UNIVERSAL POWER DOOR LOCK ACTUATOR
12 volts; 5 wires; Gun style; Central lock; A high quality door lock actuator; With 3 years limited CertifiedXL warranty. | $8.15 | | | more products.. | | | Chevrolet P10 - Other Lights, Lighting & Accessories | Oil Pressure Switch
Fit Years: 1977; AUTOTRUST PLATINUM OIL PRESSURE LIGHT SWITCH
Blade type; 1/8 in. x 27 NPT thread size; 2 to 6 psi operating pressure; With 2-prong male terminal; Normally open; AutoTrust Platinum products are guaranteed to meet or exceed the original manufacturer's standards and quality; Backed by a 5-year unlimited warranty; If the part breaks or is damaged anytime within 5 years from purchase, simply cover shipping and handling and we will send you a new part - even if we have already sent you a new product and it becomes damaged again. | $8.84 | | Turn Signal Switch
Fit Years: 1980; TRUSTBUILT TURN SIGNAL SWITCH
Blade type; Two 9-prong male terminals; A high quality, OE replacement turn signal switch; With 2 years limited TrustBuilt warranty. | $72.78 | | Oil Pressure Switch
Fit Years: 1977; OIL PRESSURE LIGHT SWITCH
Blade type; 1/8 in. x 27 NPT thread size; 2 to 6 psi operating pressure; 2-prong male terminal; Normally open; A high quality, OE replacement oil pressure light switch; Backed by 1-year, unlimited-mileage warranty. | $7.74 | | Window Switch, Front, Driver Side
Fit Years: 1980; PROZONE WINDOW SWITCH, CHROME, FRONT, DRIVER SIDE
2-button; 6-prong male terminal; With bezel; A high quality, direct fit OE replacement window switch; With 18 months limited Prozone warranty. | $11.07 | | Battery Switch
Fit Years: All; TRUCKEFX UNIVERSAL BATTERY SWITCH
3/4 in. mounting stem diameter; 17/32 in. mounting stem length; Double-pole single throw; 3/8 in. x 24 NPT thread size; Stud type; Two 2-prong male terminals; With O-ring seal and water-proof silver contacts; A high quality battery switch; With 1-year limited TruckEFX warranty. | $33.53 | | | more products.. | | | Chevrolet P10 - Exterior Body Parts | Heater
Fit Years: All; TRUSTBUILT UNIVERSAL AUTO HEATER
A high quality auto heater; With 2 years limited Trustbuilt warranty. | $68.61 | | Cigarette Lighter
Fit Years: 1980; UNIVERSAL CIGARETTE LIGHTER
With wire terminal; A high quality cigarette lighter; Backed by 1-year, unlimited-mileage warranty. | $6.39 | | Lug Nut
Fit Years: All; MR GASKET LUG NUTS, STEEL, CHROME, SET OF 5
0.5 in. thread; 0.56 in. shank length; 0.68 in. shank diameter; 0.88 in. hex size; 1.44 in. overall length; Made from solid steel material; Designed to dress up your stock or custom wheels; Standard length, offered in various thread sizes to fit most domestic and import applications. | $6.50 | | Headliner
Fit Years: All; HEADLINER REPLACEMENT KIT FOR TRUCKS, VANS, SUV'S WITH VISOR REPAIR KIT, RED HEADLINER REPLACEMENT KIT FOR VANS
Universal Headliner Replacement Kit | $66.40 | | Car Charger
Fit Years: All; MATHENY UNIVERSAL CAR CHARGER
12 to 24 volts DC input, 5 volts output, 500 milliamps output for in-door and car; 100 to 240 amps AC input, 5 volts output, 500 milliamps output; With USB port for MP3, MP4, cellphone, and iPod; Except for iPod Touch; A high quality car charger; With 1-year limited Matheny warranty. | $16.08 | | | more products.. | | | Chevrolet P10 - Mirrors & Components | Mirror
Fit Years: All; KOOL VUE UNIVERSAL MANUAL WIDE ANGLE MIRROR, NON-FOLDINGBELOW EYELINE TYPE
This OE replacement mirror is primered and made of the highest quality, rust and corrosion resistant materials to withstand all types of weather. Item is backed by 2-year Kool Vue limited warranty. Specifications: - 1.5 in. x 2 in. housing
- Stick-on style
Kool Vue specializes in producing mirrors for all vehicle makes and models; our mirrors go through rigorous testing that includes 35,000 hours of Weather Testing, 500 Swing Tests and Impact, Pull Tension, Reflection and Vibration testing to make sure you purchase the highest quality mirrors. You can't go wrong with Kool Vue Mirrors! | $2.99 | | Rear View Mirror
Fit Years: All; TRUSTBUILT UNIVERSAL DAY AND NIGHT INTERIOR REAR-VIEW MIRROR, METAL, CHROME
10 in.; With silver flame design; A high quality interior rear-view mirror; With 2 years limited Trustbuilt warranty. | $26.31 | | Mirror
Fit Years: All; TRUSTBUILT UNIVERSAL MANUAL WIDE ANGLE MIRROR, NON-FOLDINGBELOW EYELINE TYPE
This OE replacement mirror is primered and made of the highest quality, rust and corrosion resistant materials to withstand all types of weather. Item is with 2 years limited TrustBuilt warranty. Specifications: - 1.5 in. x 2 in. housing
- Stick-on style
| $3.29 | | Mirror
Fit Years: All; TRUCKEFX UNIVERSAL MANUAL WIDE ANGLE MIRROR, NON-FOLDINGBELOW EYELINE TYPE
This OE replacement mirror is primered and made of the highest quality, rust and corrosion resistant materials to withstand all types of weather. Item is with 1-year limited TruckEFX warranty. Specifications: - 1.5 in. x 2 in. housing
- Stick-on style
| $3.29 | | Rear View Mirror
Fit Years: All; AUTOTRUST GOLD UNIVERSAL INTERIOR REAR VIEW MIRROR
Unpainted; AutoTrust Gold products are guaranteed to meet or exceed the original manufacturer's standards and quality; Backed by a 5-year limited warranty; If the part breaks or is damaged - even if you are involved in a wreck or accident - anytime within 5 years from purchase, simply cover shipping and handling and we will send you a new part. | $14.90 | | | more products.. | | | Chevrolet P10 - Radiators, Cooling Systems & Components | Radiator Fan
Fit Years: All; MATHENY UNIVERSAL RADIATOR FAN SHROUD ASSEMBLY, BLACK
14 in. diameter; 8 blades; Single type; Includes motor; Does not include shroud; A high quality radiator fan shroud assembly; With 1-year limited Matheny warranty. | $39.73 | | Radiator Fan
Fit Years: All; UNIVERSAL RADIATOR FAN SHROUD ASSEMBLY, BLACK
16 in. diameter; 8 blades; Single type; Includes motor; Does not include shroud; A high quality radiator fan shroud assembly; Backed by 1-year, unlimited-mileage warranty. | $20.64 | | Thermostat Housing Gasket
Fit Years: 1979-1980; FELPRO THERMOSTAT HOUSING GASKET, COMPOSITE
Does not include mounting hardware; Designed to be direct fit OE replacement thermostat housing gasket. | $3.48 | | Radiator
Fit Years: 1975-1980; PERFORMANCE RADIATOR, ALUMINUM CORE/PLASTIC TANK, 1-ROW, NEW
26.25 x 17.31 x 0.94 in. core size, 1.31 in. inlet size, 1.56 in. outlet size, 9.8 mm tube pitch; With 8.5 in. concentric transmission oil cooler; A high quality, OE replacement radiator; With Performance Radiator limited warranty. | $147.14 | | Fan Clutch
Fit Years: 1977-1978; FAN CLUTCH
7.2 in. overall diameter; 0.63/0.75 in. pilot diameter/thread size; 0.63 in. pilot depth; 2.59 in. flange diameter; 1.62 in. fan mount height; 3.25 in. fan bolt circumference; 2.62 in. fan mount diameter; 3.34 in. overall height; Clockwise rotation; Heavy-duty thermal design; A high quality, direct fit OE replacement fan clutch; Backed by 1-year, unlimited-mileage warranty. | $39.96 | | | more products.. | | | Chevrolet P10 - Air Filters & Intake Systems | Performance Air Filter
Fit Years: All; AFE PRO 5R PERFORMANCE AIR FILTER, BLUE
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 98.6 percent filtration efficiency; Up to 550 CFM; 9 in. length, 6 in. flange inside diameter, 4 in. top diameter, 7.5 in. bottom diameter; Oiled element; Conical style; Made of five layers of progressively finer medical-grade cotton gauze; Its 100 percent polyurethane construction withstands extreme engine temperature, significantly extending its service life; Features pleated depth loading media with large surface area that provides high flow, high dirt capacity, and high filtration efficiency; Eliminates the need for sealing gasket or grease through its progressive bump seal; It has washable and reusable media with the deepest pleats in the industry; Provides your engine with the largest amount of high-flowing cold air, giving you the greatest horsepower and torque gains; It exceeds the necessary protection of your average everyday driving. | $62.00 | | Intake Manifold Gasket
Fit Years: All; MR GASKET PERFORMANCE INTAKE MANIFOLD GASKET SET
1.83 in. x 2.42 in. port dimensions, 0.125 in. thick; Made from high-quality cellulose/nitrile composition gasket material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty. | $18.69 | | Air Cleaner Nut
Fit Years: All; MR GASKET WING STYLE AIR CLEANER NUT, CHROME PLATED
A Classic Air Cleaner Nut Perfectly Matches Valve Cover Wing Bolts 1390-93, Nut Is Tapped 1/4-20 To Fit Most Applications, With Manufacturer's Limited 90-Day Warranty | $2.99 | | Air Cleaner Assembly
Fit Years: All; MR GASKET CUSTOM STYLE AIR CLEANER, CHROME PLATED
10' Diameter, 2' Height, Includes Gasket, Hardware And PCV Adapter, Fits 2-Bbl Carburetors With 2.625' Or 3.0625 Diameter Neck, With Manufacturer's Limited 90-Day Warranty | $21.83 | | Air Filter
Fit Years: All; K&N SMALL ENGINE AND LIGHT INDUSTRIAL AIR FILTER
K&N'S SMALL ENGINE AND LIGHT INDUSTRIAL AIR FILTER WORKS AS A DIRECT REPLACEMENT FOR SMALL INDUSTRIAL ENGINES, UTILITY LAWNS AND GARDEN UNITS, AIR COMPRESSORS, GENERATORS, CHAINSAWS AND OTHER LIGHT INDUSTRIAL MACHINES. IT GUARANTEES LONG LASTING DURABILITY WITH EXCELLENT FILTRATION.
SPECIFICATIONS- 1.75 IN. HEIGHT, 5.5 IN. INSIDE DIAMETER, 7 IN. OUTSIDE DIAMETER
- ROUND STYLE
FEATURES
| $27.60 | | | more products.. | | | Chevrolet P10 - Exhaust Systems & Components | Exhaust Pipe
Fit Years: All; BORLA STRAIGHT TUBING, STAINLESS STEEL, NATURAL FINISH, SOLD INDIVIDUALLY
2.25 in. piping diameter, 5 in. length; Made from aircraft-quality 100 percent T-304 austenitic stainless steel; Can be polished to a mirror shine. | $66.99 | | Muffler
Fit Years: 1980; MBRP UNIVERSAL MUFFLER, ALUMINIZED STEEL, NATURAL FINISH
5 in. inlet and outlet diameter; Single center inlet and outlet configuration; 24 in. body length, 31 in. overall length; Round casing; Perforated internal construction; Made of 16-gauge aluminized steel; Features an outstanding straight through design for lesser restriction, improved performance, and excellent exhaust sound; Fully welded; With MBRP's limited warranty. | $127.08 | | Muffler
Fit Years: All; TRUSTBUILT UNIVERSAL HIGH PERFORMANCE MUFFLER, STAINLESS STEEL, POLISHED
14 in. L x 8 in. W x 5 in. H; 24.5 in. overall length; 2.25 in. inlet diameter; 3.25 x 3.5 in. outlet diameter; Single center inlet and dual center outlet configuration; Oval casing; With dual square bend slanted tip; Improves your vehicle's performance and dramatically decreases its noise producing an aggressive but cool tone from the inside; Modifications might be required; With 2 years limited Trustbuilt warranty. | $140.96 | | Exhaust Tip
Fit Years: All; GIBSON EXHAUST TIP, T-304 STAINLESS STEEL, POLISHED, SOLD INDIVIDUALLY
3 in. outlet diameter, 2.5 in. inlet diameter, 18 in. length; Round shape; Single style; Slash-cut non-rolled edge; With flame design; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation. | $73.46 | | Exhaust Tip
Fit Years: All; GIBSON EXHAUST TIP, STAINLESS STEEL, POLISHED, SOLD INDIVIDUALLY
2.5 in. inlet; 3.5 in. outlet; 8 in. length; Single style; Round shape; Angle cut, non-rolled edge; Made of 100 percent polished T-304 stainless steel designed to deliver a brilliant show look and clean custom appearance; Will not chip, flake, or rust like chrome; Features an exclusive built-in clamp at the end of each tip; Made in USA; Easy and hassle-free clamp-on installation. | $42.83 | | | more products.. | | | Chevrolet P10 - Headlights & Headlamps | Headlight Conversion Kit
Fit Years: 1980; RAMPAGE HEADLIGHT CONVERSION, SOLD INDIVIDUALLY
200 mm; With rectangular clear glass lens; Bulbs not included; Features a durable die cast aluminum reflector for improved beam output; Produces 45 percent more luminous light on low beam and 30 percent more luminous light on high beam than conventional sealed beam headlights; Provides extra safety by increasing the visibility range while driving; Uses replaceable H4, 12 volt street legal 55/60 watts bulb, or off road use only; DOT and SAE certified; With Rampage's 90 day warranty. | $52.79 | | Headlight, Driver And Passenger Side
Fit Years: 1978; UNIVERSAL HEADLIGHTS, CHROME HOUSING, CLEAR GLASS LENS, SET OF 2, DRIVER AND PASSENGER SIDE
7 in. x 6 in.; Bulbs not included; Without turn signal light; Composite type; DOT and SAE approved; A high quality universal headlight set. | $27.88 | | Headlight, Driver Or Passenger Side
Fit Years: 1978; PROZONE HEADLIGHT ASSEMBLY, CLEAR GLASS LENS, DRIVER OR PASSENGER SIDE
Bulbs included; Sealed beam and halogen type; Round; DOT and SAE approved; A high quality, direct fit OE replacement headlight assembly; With 18 months limited Prozone warranty. | $22.43 | | Headlight, Driver Or Passenger Side
Fit Years: 1978; AUTOTRUST GOLD HEADLIGHT ASSEMBLY, WITH BULBS, SOLD INDIVIDUALLY, DRIVER OR PASSENGER SIDE
Sealed beam and halogen type; Clear glass lens; Round; DOT and SAE approved; AutoTrust Gold products are guaranteed to meet or exceed the original manufacturer's standards and quality; Backed by a 5-year limited warranty; If the part breaks or is damaged - even if you are involved in a wreck or accident - anytime within 5 years from purchase, simply cover shipping and handling and we will send you a new part. | $22.43 | | Headlight, Driver Or Passenger Side
Fit Years: 1978; TRUSTBUILT HEADLIGHT ASSEMBLY, CLEAR GLASS LENS, DRIVER OR PASSENGER SIDE
6 in. x 8 in.; Bulbs included; Sealed beam and capsule type; DOT and SAE approved; A high quality, OE replacement headlight assembly; With 2 years limited TrustBuilt warranty. | $41.80 | | | more products.. | | | Chevrolet P10 - Interior Accessories | Seat Belt, Front, Driver And Passenger Side
Fit Years: 1975-1980; UNIVERSAL 3-POINT RETRACTABLE SEAT BELT, BLACK, SET OF 2, FRONT, DRIVER AND PASSENGER SIDE
1-3/4 in. width x 131 in. full extended length; 3.5 x 3.5 x 2.7 in. retractable spool box size; 10 mm bolt mounting; Includes 13 in. center push buckles; Without air bag sensor; Wall mount type; May require modification or other adjustments to vehicle; Backed by 1-year, unlimited-mileage warranty. | $89.66 | | Seat Belt
Fit Years: 1975-1980; PROZONE UNIVERSAL RACING SEAT BELT, 6-POINT, RED, SOLD INDIVIDUALLY
Includes harness with latch link release mechanism; Manufactured from high quality and durable material to enhance the appearance and performance of your racing seat belt; This seat belt may require modification or other adjustments to your vehicle upon installation; With 18 months limited Prozone warranty. | $95.07 | | Horn Button
Fit Years: All; TRUSTBUILT UNIVERSAL HORN BUTTON, CHROME
Screw type; With 2-prong terminal, steel shell, plastic button, and screw-in switch mounting; A high quality horn button; With 2 years limited TrustBuilt warranty. | $1.87 | | Pedal Pad
Fit Years: All; MR GASKET UNIVERSAL DELUXE CUSTOM GAS PEDAL PAD, SOLD INDIVIDUALLY
5.5 x 2.5 x 0.125 in.; A long wearing pedal pad with bright contrasting chrome trim; Simply clamp over original pedal for permanent non-slip installation; Fits most cars with cowl pedal; No drilling or alterations required. | $6.77 | | Horn Button
Fit Years: All; MARTINS UNIVERSAL HORN BUTTON, CHROME
Screw type; With 2-prong terminal, steel shell, plastic button, and screw-in switch mounting; A high quality horn button; With 1-year limited Martins warranty. | $1.87 | | | more products.. | |
|  | Please Select Your Part... | | |
| Chevrolet P10 - Car Care | Applicator
Fit Years: All; CARRAND THE 10 WASHGLOVE CLEANING SYSTEM
This WashGlove Cleaning System Features A Threaded Pole Adapter That Works With Water Flow-Thru, Wood, Aluminum, Metal Or Plastic Poles For Extended Reach For SUV, Track And RV, Adjustable TPR Anti-Fatigue Strap With Pull Tab, V-Flex Points Allow For Full Shell Flex, Textured Top Surface For Extra Gripping Power, Detail Edge Fits Any Seam Or Crevice, 100% Sheepskin Cover Lifts And Traps Dirt Particles Away From Paint And Is Super Soft And Gentle On Any Surface, Gripping Ribs For Full Flex-Control | $7.00 | | Polishing Cloth
Fit Years: All; SURF CITY GARAGE NANO-DETAIL POLISHING CLOTHS, 3 PIECES
16 x 16 in.; Made from highest quality and rarest microfiber blend; Maximizes cleaning power while eliminating abrasion; Ultra-absorbent and long-lasting; Perfect for washing and drying as well as for applying and removing waxes and polishes. | $8.99 | | Towel
Fit Years: All; CARRAND COTTON TERRY TOWEL PACK
Twelve (12) Cotton Terry Towels Per Pack | $6.59 | | Detail Brush
Fit Years: All; CARRAND GRIP TECH DELUXE INTERIOR BRUSH
Made With A Flared Bristle Design, Easily Aids In Getting Hard To Reach Areas While The Gripping TPR Handle Provides Comfort And Functionality, Features Deluxe Interior Brush To Maximize Cleaning Function To Any Vehicle Interior, Stiffs Bristles Removes Dirt From Vehicle Carpet To Upholstery | $2.22 | | Cargo Carrier
Fit Years: All; LUND HITCH MOUNTED CARGO CARRIER, POWDERCOATED BLACK
21 x 61 in.; 500 lbs. distributed load capacity; Fits standard 2 in. receiver hitch; Features a folding type, hitch mounted design and pre-punched holes for tie-down straps; Quick and easy installation. | $126.06 | | | more products.. | | | Chevrolet P10 - Grilles & Components | Grille Assembly
Fit Years: 1978; TRUCKEFX COMPLETE GRILLE AND SHELL ASSEMBLY, PLASTIC, SILVER
Without emblem provision; A high quality, OE replacement complete grille and shell assembly; With 1-year limited TruckEFX warranty. | $41.92 | | Grille Trim
Fit Years: 1978; CERTIFIEDXL GRILLE MOLDING, UPPER
With chrome grille; A high quality, direct fit OE replacement grille molding; With 3 years limited CertifiedXL warranty. | $17.08 | | Grille Molding
Fit Years: 1978; GRILLE MOLDING, LOWER
Grille surround; A high quality, direct fit OE replacement grille molding. | $17.97 | | Grille Assembly
Fit Years: 1978; AUTOTRUST GOLD PLASTIC COMPLETE GRILLE AND SHELL ASSEMBLY, SILVER
Without emblem provision; AutoTrust Gold products are guaranteed to meet or exceed the original manufacturer's standards and quality; Backed by a 5-year limited warranty; If the part breaks or is damaged - even if you are involved in a wreck or accident - anytime within 5 years from purchase, simply cover shipping and handling and we will send you a new part. | $41.92 | | Grille Assembly
Fit Years: 1978; TRUSTBUILT COMPLETE GRILLE AND SHELL ASSEMBLY, PLASTIC, SILVER
Without emblem provision; A high quality, OE replacement complete grille and shell assembly; With 2 years limited TrustBuilt warranty. | $41.92 | | | more products.. | | | Chevrolet P10 - Brakes, Suspension & Steering | Leaf Spring Clamp
Fit Years: All; RANCHO LEAF ALIGNMENT CLAMPS, SET OF 2
2 in. width; Helps maintain leaf stack alignment when using Add-A-Leafs. | $8.27 | | Ball Joint, Front
Fit Years: 1975-1980; MOOG BALL JOINT, SOLD INDIVIDUALLY, FRONT, UPPER
Includes mounting hardware and ball joint boots that prevent contamination and allow debris to be flushed out when the ball joint is serviced; This high quality and direct fit OE replacement ball joint features a housing forged from fine-grain alloy steel for unequaled strength and durability, powdered-metal gusher bearings that resist wear better than conventional designs, and pressed-in cover plates to provide a solid-steering feel. | $53.51 | | Wheel Cylinder, Rear
Fit Years: 1975-1980; CENTRIC PREMIUM WHEEL CYLINDER, SOLD INDIVIDUALLY, REAR
0.94 in. bore diameter; Includes brass inverted flare insert for positive leak free connection; This is a high quality, OE replacement wheel cylinder. | $5.85 | | Shock Absorber and Strut Assembly
Fit Years: All; RANCHO RS9000X PRO REMOTE RESERVOIR SHOCK ABSORBER, LIQUID METALLIC FINISH, SOLD INDIVIDUALLY
For custom off-road use only; 36.125 in. extended length, 21.125 in. collapsed length, bushing upper and lower mount; Includes clamps, cushions, polyurethane bushings and boot; Features an anodized aluminum external reservoir with stainless steel braided high pressure hose and anodized billet end caps; This triple tube gas shock absorber has 9-position adjustability and ensures exceptional performance under a full range of load and temperature conditions. | $194.99 | | Shock Bushing
Fit Years: All; ENERGY SUSPENSION SHOCK EYES, BLACK, SET OF 2
0.62 in. inner diameter; 1.25 in. outer diameter; 1.62 in. length; Chrysler straight eye style; Made of Hyper-Flex polyurethane to resist oil, road salt, and other corrosives; Improves shock performance; Provides instant suspension response and control. | $2.99 | | | more products.. | | | Chevrolet P10 - Bumpers & Components | Step Bumper, Rear
Fit Years: 1978; CERTIFIEDXL STEP BUMPER, STEEL, CHROME, REAR
With provision for license plate and step pad; A high quality, OE replacement step bumper; With 3 years limited CertifiedXL warranty. | $348.40 | | Step Bumper, Rear
Fit Years: 1978; TRUSTBUILT STEP BUMPER, STEEL, CHROME, REAR
With provision for license plate and step pad; A high quality, OE replacement step bumper; With 2 years limited TrustBuilt warranty. | $348.40 | | Bumper, Front
Fit Years: 1978; BUMPER FACE BAR, STEEL, CHROMETHIS REPLACEMENT BUMPER FACE BAR IS CONSTRUCTED FROM HIGH QUALITY GAUGE OF STEEL TO ENSURE STRENGTH AND SAFETY DURING COLLISION; BUILT TO MATCH OE SPECIFICATIONS FOR THAT PRECISION FITTING, SERVICE, AND PROTECTION. ON TOP OF THAT, THIS PRODUCT IS SUPPLIED BY A CAPA CERTIFIED, ISO/TS16949, AND ISO9001 MANUFACTURING FACILITY. NOTES: - REQUIRES NO DRILLING
- REPLACES OE NUMBER 464364
- DOES NOT INCLUDE BRACKETS
REPLACEMENT BRAND PARTS ARE THE MOST AFFORDABLE SOLUTION FOR ALL OF YOUR REPLACEMENT NEEDS! REPLACEMENT SPECIALIZES IN BODY PARTS AND LIGHTING PRODUCTS; IT ALSO STOCKS A WIDE ARRAY OF ORIGINAL EQUIPMENT (OE) QUALITY ELECTRICAL, BRAKES, SUSPENSION, INTAKE, EXHAUST, COOLING AND HEATING PARTS. UNLIKE MORE EXPENSIVE ITEMS FROM YOUR DEALER, THE BRAND NEW PARTS WE OFFER ARE THE MOST ECONOMICAL IN THE MARKET AND ARE THE PERFECT REPLACEMENT FOR YOUR OLD, BROKEN OR DAMAGED OEM PARTS. BEST OF ALL, ALL REPLACEMENT BRAND ITEMS ARE BACKED BY A 1-YEAR, UNLIMITED-MILEAGE WARRANTY. , FRONT
| $100.20 | | Bumper, Front
Fit Years: 1978; TRUSTBUILT BUMPER FACE BAR, STEEL, CHROMETHIS TRUSTBUILT BUMPER FACE BAR IS CONSTRUCTED FROM HIGH QUALITY GAUGE OF STEEL TO ENSURE STRENGTH AND SAFETY DURING COLLISION; BUILT TO MATCH OE SPECIFICATIONS FOR THAT PRECISION FITTING, SERVICE, AND PROTECTION. ON TOP OF THAT, THIS PRODUCT IS SUPPLIED BY A CAPA CERTIFIED, ISO/TS16949, AND ISO9001 MANUFACTURING FACILITY WITH 2 YEARS LIMITED TRUSTBUILT WARRANTY. NOTES: - REQUIRES NO DRILLING
- REPLACES OE NUMBER 464364
- DOES NOT INCLUDE BRACKETS
, FRONT
| $160.32 | | Bumper, Front
Fit Years: 1978; BUMPER FACE BAR, STEEL, BLACK, FRONT
With holes for guard and license plate; A high quality, direct fit OE replacement bumper face bar. | $62.50 | | | more products.. | | | Chevrolet P10 - Fog Lights, Driving Lights, Components & Accessories | Fog Light Kit
Fit Years: 1980; RAMPAGE ROUND FOG LAMP KIT, BLACK METAL HOUSING
6.25 x 7.00 x 2.25, Provides Extra Safety By Increasing The Visibility Range While Driving, Features 55-Watt H3 Halogen Bulb That Provides Better Illumination, With A Durable And Clear Glass Driving Lamp Lens, Includes 2 Lights, 2 Polymer Wire Grid Stone Guards, Wiring Harness, Relay, And Switch, With Manufacturer's 90-Day Warranty | $96.27 | | Fog Light Kit
Fit Years: 1980; RAMPAGE RECTANGULAR FOG LAMP KIT, BLACK POLYMER HOUSING
5.75 x 3.50 x 3.00, Provides Extra Safety By Increasing The Visibility Range While Driving, Features 55-Watt H3 Halogen Bulb That Provides Better Illumination, With A Durable And Clear Glass Fog Lamp Lens, Includes 2 Lights, 2 Polymer Wire Grid Stone Guards, Wiring Harness, Relay, And Switch, With Manufacturer's 90-Day Warranty | $48.09 | | Fog Light Lens
Fit Years: All; KC HILITE UNIVERSAL FOG LIGHT LENS, PLASTIC, AMBER, SOLD INDIVIDUALLY
5 in. width; 7 in. length; Rectangular; A high quality fog light lens; For use with 55 watts H3 halogen bulb with part number 2551; Fits 57 series lights with part numbers 735, 1530, 737, 1557, 738, 1558, 785, 1587; With 23-year KC Hilites warranty. | $6.90 | | Driving Light
Fit Years: All; KC HILITE DAYLIGHTER SERIES DRIVING LIGHTS, SET OF 2
6-1/8 in.; Round; Long range; Includes pre-terminated relay style wiring harness, illuminated switch, 40-ampere relay, plastic light covers, illustrated installation instruction, and replaceable 130 watts H3 halogen bulbs with 285,000 beam candlepower; With optical quality clear glass lenses for maximum clarity and light projection, precision polished and focused reflectors, and chrome plated steel housings; Features patented shock mounted housings that reduce lamp failure due to vibration; Replaces OE number 4213. | $160.94 | | Driving Light
Fit Years: All; KC HILITE UNIVERSAL 50 SERIES HALOGEN DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY
Bulb included; 100 watts; 90,000 candle power; 4.75 in. diameter; 5.81 in. height including bracket; 4.38 in. depth; Driving beam; With 0.5 in. mounting stud and chrome plated steel housing; Features computer designed parabolic reflector; Replaces wiring harness with part number 6315, lens or reflector with part number 4207, bulb with part number 2767, bezel with part number 3012, gasket with part number 3077A, and O-ring 3077R; With 23-year KC Hilites warranty. | $52.24 | | | more products.. | | | Chevrolet P10 - Heating, Air Conditioning & Components | Blower Motor
Fit Years: 1979-1980; AUTOTRUST PLATINUM BLOWER MOTOR ASSEMBLY, WITH FAN BLADE, BLACK, BRAND NEW
AutoTrust Platinum products are guaranteed to meet or exceed the original manufacturer's standards and quality; Backed by a 5-year unlimited warranty; If the part breaks or is damaged anytime within 5 years from purchase, simply cover shipping and handling and we will send you a new part - even if we have already sent you a new product and it becomes damaged again. | $101.14 | | Blower Motor
Fit Years: 1979-1980; TRUSTBUILT BLOWER MOTOR ASSEMBLY, BLACK, NEW
With fan blade; A high quality, OE replacement blower motor assembly; With 2 years limited TrustBuilt warranty. | $101.14 | | Blower Motor
Fit Years: 1979-1980; BLOWER MOTOR ASSEMBLY, BLACK, NEW
With fan blade; A high quality, OE replacement blower motor assembly; Backed by 1-year, unlimited-mileage warranty. | $78.95 | | Blower Motor
Fit Years: 1979-1980; MARTINS BLOWER MOTOR ASSEMBLY, BLACK, NEW
With fan blade; A high quality, OE replacement blower motor assembly; With 1-year limited Martins warranty. | $101.14 | | Blower Motor
Fit Years: 1979-1980; MATHENY BLOWER MOTOR ASSEMBLY, BLACK, NEW
With fan blade; A high quality, OE replacement blower motor assembly; With 1-year limited Matheny warranty. | $101.14 | | | more products.. | | | Chevrolet P10 - Tools & Garage | Hitch Ball Mount
Fit Years: All; REESE ADJUSTABLE BALL MOUNT, POWDERCOATED BLACK
1 Shank Hole, 13.5 Length, 6.25" Rise, 7.5" Drop, Features A 500/5000 Lbs Rating And 13.75" Height Adjustment Capacity In Dual Platforms That Allows For Quicker Changeover Between Trailers, Easy Pull-Pin Locking, With Manufacturer's Limited Lifetime Warranty | $32.52 | | Trailer Hitch Coupler
Fit Years: All; REESE CLASS II TRAILER HITCH COUPLER
3 in. channel; For 2 in. hitch ball; 350 lbs. tongue weight capacity; 3500 lbs. gross load capacity; Secures the trailer tongue to the ball mount on a hitch. | $41.53 | | Engine Lift Plate
Fit Years: All; LAKEWOOD MOTO-LIFT
Fabricated From Heavy-Gauge Steel Plate, Aids In The Installation And Removal Of All V-Type Internal Combustion Engines, Moto-Lift Bolts Directly To Most Intake Manifolds On American-Made Vehicles, Comes With Three Locating Positions To Allow Various Weights, Keeps The Engine Balanced During Installation Or Removal, With Manufacturer's Limited 90-Day Warranty | $29.25 | | Wire Ties
Fit Years: All; TAYLOR CABLE 4" WIRE TIES, YELLOW, 25 PIECES
1.16' - 1 Bundle Diameter, 18 Lb Minimum Loop Tensile Strength, Made Of Strong And Brightly Colored Nylon Material To Coordinate Nicely With Other Accessories, With Manufacturer's Limited 90-Day Warranty | $3.56 | | TPMS Valve Kit
Fit Years: 1980; ORANGE ELECTRONICS RETRO-FIT TIRE PRESSURE MONITORING SYSTEM
Includes four sensors with adjustable valves, LED display, and 12-volt power adapter; Displays pressures from 0 to 76 psi, accurate to plus or minus 1 psi; Displays temperatures from -22 to approximately 200 degrees Fahrenheit, accurate to plus or minus 4 degrees; Customize display to show psi, kpa or bar units, and Celsius or Fahrenheit temperature; Normal green indicators change to red alerts to signify temperature or pressure concerns; High pressure warning level can be set between 40 and 60 psi, while low pressure warning level can be set between 18 and 35 psi; Sensors' lithium batteries will last up to 7 years under normal conditions; Not for vehicles with OE TPMS; With Orange Electronics' limited 1-year warranty. | $142.76 | | | more products.. | | | Chevrolet P10 - Wheels & Wheel Covers | Wheel Spacer
Fit Years: All; MR GASKET DISC BRAKE WHEEL SPACERS, SET OF 2
Fits Datsun, Toyota, Pinto, Maverick, and Vega wheels with 4-4.25 in. bolt circles; 1/4 in. thick; Constructed from die-cast aluminum; Provides clearance needed for custom wheel applications; Longer studs or lug nuts may be required; Not for use on station wagons, RVs, off-road vehicles or trailers; With Mr Gasket's limited 90-day warranty. | $17.18 | | Dust Cap
Fit Years: All; REESE WHEEL BEARING PROTECTOR
1.781 in. diameter hub; This wheel bearing protector keeps water and dirt out and permits easy lubrication for longer bearing life; With Reese's limited one-year warranty. | $15.64 | | Center Cap
Fit Years: All; MR GASKET CUSTOM WHEEL HUB COVER, STEEL, CHROME, SOLD INDIVIDUALLY
3.56 in. inner diameter; This gleaming, chrome-plated hub cover is exclusively designed for mag wheels; Purchase 4 of this item to improve the overall look of your wheels. | $7.24 | | | | Chevrolet P10 - Hoods & Components | Hood Insulation
Fit Years: All; METRO MOULDED UNIVERSAL HOOD INSULATION, FIBERGLASS, BLACK, SOLD INDIVIDUALLY
48 x 65 in.; A high quality hood insulation. | $42.41 | | |
|
